Production of topographic maps and calculation of cut and fill volumes from GPS data using AutoCAD Civil 3D computer techniques

Authors

  • Yakhlaf Zakrie Yakhlaf Department of Civil Engineering, Higher Institute of Engineering Technologies, Tripoli, Libya Author
  • Aisam Mohamed Emhamed Al-Bandag Department of Civil Engineering, Higher Institute of Engineering Technologies – Tarhuna, Libya Author
  • Ammar Mostafa Jomaa Ramadan Higher Institute for Sciences and Technology - Awlad Ali Author

DOI:

https://doi.org/10.65405/9abjcx97

Keywords:

Topographic Maps, Earthwork Quantities, Global Positioning System (GPS), AutoCAD Civil 3D, Triangulated Irregular Network (TIN).

Abstract

This study aims to present an integrated methodology for generating topographic maps and calculating earthwork quantities (cut and fill) utilizing field data collected via the Global Positioning System (GPS) and processed through computer-aided design techniques using AutoCAD Civil 3D. The research relied on capturing precise spatial and elevation points from the study area to accurately represent real-world site conditions. These dataset points were subsequently imported and structured within the software environment to construct Digital Elevation Models (DEMs). Triangulated Irregular Network (TIN) surfaces were generated along with contour maps to visualize the topographic elevation characteristics, followed by the design of longitudinal profiles and cross-sections to compute precise cut and fill volumes using the composite volumes (surface-to-surface) method. The results demonstrated the high efficiency of integrating GPS technology with AutoCAD Civil 3D in significantly reducing both field survey and office computation time, while providing superior precision compared to conventional surveying methods. Consequently, this enhances the accuracy of financial and engineering estimates for construction and highway projects. The study recommends adopting this integrated methodology in surveying and civil engineering projects due to its high precision, operational flexibility, and speed in supporting engineering decision-making.

Downloads

Download data is not yet available.

References

1. إبراهيم، محمد الطاهر، استخدام تقنية GPS في الرفع المساحي لإنتاج الخرائط الطبوغرافية بمدينة طرابلس، كلية الهندسة، جامعة طرابلس، مكتبة جامعة طرابلس، ليبيا، 2018.

2. داود، جمعه محمد، مدخل الي الخرائط الرقمية، مكة المكرمة، المملكة العربية السعودية،2012.

3. عبد العزيز محمد حسن، الهندسة المساحية الحديثة GPS,GIS,RS، دار الميسرة للنشر والتوزيع- الأردن.

4. السنوسي أحمد، إسهامات نظم المعلومات الجغرافية GIS وGPSفي إنجاز المشاريع الهندسية في ليبيا، جامعة بنغازي، ليبيا، 2019.

5. سلام، محمود عبد الحميد “المساحة وتطبيقات GPS الأردن، 2016.

6. شبلي، فتحي محمد، تطبيقات نظم المعلومات الجغرافية والخرائط الرقمية، دار الفكر العربي –مصر، 2014.

7. عبد العزيز، محمد حسن، الهندسة المساحية الحديثة GIS –GPS، دار الميسرة، الأردن، 2019.

8. الزعبي، مؤيد عبد الله، استخدام GPS وGIS في إعداد الخرائط والمسوحات الطبوغرافية الأردن، 2013.

9. العيسوي محمد عبد الفتاح، الرسم الهندسي باستخدام أوتوكاد، دار الصفاء للنشر والتوزيع، عمان، الأردن، 2018.

10. عبد القادر أحمد محمد المساحة المستوية والتطبيقات باستخدام AutoCAD مكتبة المجتمع العربي عمان، 2019.

11. عبيدات محمد سالم، المساحة التطبيقية استخدام الأجهزة والبرمجيات، دار الميسرة للنشر والتوزيع الأردن، 2017.

12. وليد صالح علي، تطبيقات هندسة الطرق، 2018 AutoCAD civil3D.

Downloads

Published

2026-11-15

How to Cite

Production of topographic maps and calculation of cut and fill volumes from GPS data using AutoCAD Civil 3D computer techniques. (2026). Comprehensive Journal of Science, 11(42), 2361-2374. https://doi.org/10.65405/9abjcx97